IronPort Systems 4108GL Switch User Manual


 
Index 3
Index
SNMP-based A-11
switch-to-switch A-9
troubleshooting A-12
Xmodem A-6
download OS A-9
download, TFTP A-3A-4
duplicate IP address
effect on authorized IP managers 10-13
duplicate MAC address
See MAC address
Dyn1
See LACP
E
ending a console session 2-5
event log 2-7, 18-16
navigation 18-17
severity level 18-16
use during troubleshooting 18-16
F
factory default configuration
restoring 5-7, 18-26
failure, OS download A-12
Fast EtherChannel
See FEC
fast mode
spanning tree 16-4, 16-10
fault detection 4-9
fault detection policy 4-9, 4-24
fault detection policy, setting 4-24
fault detection window 4-24
fault-tolerance 11-11
FEC
benefits 11-29
filters
effect of IGMP 15-20
maximum allowed 15-20
firmware version 17-5
flash memory 2-10
flow control 11-4
flow control, status 17-9
flow control, terminal 6-3
forbid
See GVRP
format, date 18-16
format, time 18-16
forwarding port, IGMP 15-5
G
GARP
See GVRP
gateway 7-3, 7-5
gateway (IP) address 7-4, 7-6
gateway, manual config 14-8
global config level 7-8
GVRP
advertisement 14-43
advertisement, defined 14-30
advertisement, responses to 14-32
advertisements, generating 14-36
auto 14-35
benefit 14-30
block 14-34
CLI, configuring 14-39
configurable port options 14-33
configuring learn, block, disable 14-34
convert dynamic to static 14-33
converting to static VLAN 14-30
disable 14-34
dynamic VLAN and reboots 14-43
dynamic VLANs always tagged 14-31
forbid 14-35
GARP 14-30
general operation 14-31
IP addressing 14-33
learn 14-34
learn, block, disable 14-35
menu, configuring 14-37
non-GVRP aware 14-43
non-GVRP device 14-43
operating notes 14-42
port control options 14-36
port-leave from dynamic 14-36
reboot, switch 14-36
recommended tagging 14-36
standard 14-30
tagged, dynamic VLAN 14-31
unknown VLAN 14-36
unknown VLAN, options 14-33
VLAN behavior 14-8
VLAN, dynamic adds 14-14
VLAN, maximun 14-42