IronPort Systems 4108GL Switch User Manual


 
Index 7
Index
quick start iii, 7-4
R
reboot 2-8, 2-10, 2-12, 14-36
reboot, actions causing 5-3
reconfigure 2-10
redundant path 16-2, 16-9
spanning tree 16-3
report
See IGMP
reset 2-12, 5-9
Reset button
restoring factory default configuration 18-26
reset port counters 17-9
resetting the switch
factory default reset 18-26
restricted access 12-5
restricted write access 12-5
RFC
See MIB
RFC 1213 12-3
RFC 1493 12-3
RFC 1515 12-3
RFC 1573 12-3
RFC 1757 12-3
RIPE NCC 7-14
RMON 12-2
RMON groups supported 12-11
router 14-29, 15-11
gateway 7-6
router release A.09.70 14-29
RS-232 1-3
S
security 4-12, 6-3
authorized IP managers 10-4
Self Test LED
behavior during factory default reset 18-26
serial number 17-5
server
access failure 16-3
setting a password 9-5
setting fault detection policy 4-24
setup screen iii, 7-4
severity code, event log 18-16
slow network 18-6
SNMP 12-2
CLI commands 12-5
communities 12-412-6
Communities screen 12-5
community
configure 12-4
IP 12-2
public community 12-412-5
restricted access 12-5
traps 12-2
SNMP-based download A-11
SNTP
broadcast mode 8-2, 8-9
broadcast mode, requirement 8-3
configuration 8-4
disabling 8-10
enabling and disabling 8-9
event log messages 8-23
menu interface operation 8-23
operating modes 8-2
poll interval 8-12
See also TimeP and SNTP. 8-3
selecting 8-3
unicast mode 8-3, 8-10
unicast time polling 8-20
unicast, address priority 8-21
unicast, deleting addresses 8-22
unicast, replacing servers 8-22
viewing 8-4, 8-8
software version 17-5
sorting alert log entries 4-20
spanning tree 16-2
blocked link 16-12
blocked port 16-9
description of operation 16-9
enabling from the browser interface 16-9
enabling in the CLI 16-6
fast mode 16-4, 16-10
global information 17-17
information screen 17-17
link priority 16-3
port cost 16-9
port priority automatic setting 16-9
problems related to 18-9
statistics 17-17
using with port trunking 11-15
VLAN effect on 14-27
spanning tree and CDP 12-23