Filter
Top Products
4 www.kodak.com/go/aiosupport
2
Configuring Your Printer
This section explains how to configure or change your printer settings and your
wireless network settings.
Configuring printer settings
NOTE: When you first power on the printer, the printer automatically steps you
through the process of selecting the
Language and Country/Region.
To set or change basic printer settings:
1. Press Home.
2. Press to select Printer Settings, then press OK.
3. Press to select one of the following settings:
• Date and Time*
–Press OK, then press to select Ye a r , Month, Day, Hour, or Minute.
Press or to change the values; press OK when you are done.
• Button Sounds
–Press to select On or Off.
• Ti me to L ow Pow er
–Press to change the time to energy-saving low power (select from 1 to 4
hours in 0.5 hour increments). After the time to low power, the printer goes
into a low-power mode.
• Language
–Press OK, press to select a language, then press OK.
• Country/Region
–Press OK, press to select a country or region, then press OK.
• Reset All Settings (see Resetting factory defaults, page 64)
NOTE: Resetting factory defaults does not change the date and time, language, or
country/region.
4. Press Back to go back to the Main Menu.
* You can also synchronize the printer's date and time to your computer from Home
Center Settings
under Tools in Home Center Software.