Filter
Top Products
A-61097 May 1997 3-87
Print Definitions
This mode defines the information printed on each document, based upon
the document level.
The default values are Nothing Printed for Level 0 documents; Full Image
Address with all delimiters for Level 1, Level 2, and Level 3 documents
<FF/IA All Del>.
■ Microimager 70 ■ Microimager 70/AFM ■ Scanner 900
■ Scanner 923 ■ Scanner/Microimager 990 ■ Scanner 9500
If the same information is to be printed on documents of all levels:
1. Select Same Format per Level.
Print Items
Current Print Sequence Display Values
New Print Sequence Display Values
Full IA w/No Delimiters
Full IA w/FF Delimiter
Full IA w/All Delimiter
Fixed Field Only
Indexed Fields Only
Current Field Level
Spaces between Items
Current Day
Current Date
Current Time
Document Counter
Roll Number
Message 1-9
Check Digit
Nothing Printed
Previous Menu
When using a Microimager 70 without the Advanced Function Module
installed, a limited number of items may be selected. The available items
are:
• Full IA w/ All Delimiter
• Indexed Fields Only
• Nothing Printed
When using a Microimager 70 with the Advanced Function Module
installed, all of the items are available for selection, with a maximum of
38 characters (including spaces).
NOTE: If the definition exceeds the 38 character limit, the first 38
characters will be printed on each document and the remainder of
the information will be truncated.
2. Select the item(s) to be printed.