Filter
Top Products
†
May be executed while transport is running.
* Available when filming; for use only with Microimager 70 (with or without AFM), and
Scanner/Microimager 990.
** Available when scanning; for use only with the Scanner 900, Scanner 923, Scanner 9500, and
Scanner/Microimager 990.
*** Available when using advanced capabilities; for use only with the Microimager 70 (with AFM),
Scanner 900, Scanner 923, Scanner 9500, and Scanner/Microimager 990.
B-2 A-61097 May 1997
P-Key Definition Input
Code Function Code Name/Description Required Optional
F12
†
Level 2 Count
Allows you to display the total number of documents
assigned Level 2. Also allows you to reset the count
to zero.
f12
F13
†
Level 3 Count
Allows you to display the total number of documents
assigned Level 3. Also allows you to reset the count
to zero.
f13
F14 Reset Level Counts
Allows you to reset all counters (Level 0, Level 1,
Level 2, Level 3, and Total) to zero.
f14
F15 Alarm Volume
Allows you to adjust the volume of the alarm.
f15
F16 Alarm Tone
Allows you to adjust the pitch of the alarm tone.
f16
F17
†
Elapsed Time
Allows you to display the number of hours the motor,
transport, and AC have been running, in addition to
the non-resettable document count.
f17
F18 Display Contrast
Allows you to adjust the contrast of the Status
Display.
f18
F19 Display Language
Allows you to choose the language in which the
Status Display messages will appear.
f19
F20 Measurement System
Allows you to choose the measurement system in
which measurements are displayed.
f20
F21*** Change Time
Allows you to change the time.
f21
F22*** Change Date
Allows you to change the date.
f22
F23
†
*** Time and Date Display
Allows you to view the current time and date.
f23
F24* AEC On/Off
Allows you to turn the Automatic Exposure Control on
or off.
f24 ,0 off/disabled
,1 on/enabled
F25* AEC Auto Adjust
Allows you to adjust the AEC exposure setting when
the AEC is in Auto Mode (ON).
f25