Filter
Top Products
6
Network Printing in a Windows Environment (Available only with FAX3900)
6-10
6.3 Checking the Setup Procedures
This section describes the required procedures for setting up network
printing for the selected network print method.
Peer-to-Peer Printing
1 Connect the network cable. (“Connecting the Network Cable” on
page 2-2)
2 Specify the IP address, subnet mask, and default gateway settings for
the copier. (
“Assigning an IP Address” on page 6-2)
3 Print the configuration page and check the settings. (“Printing the
Configuration Page” on page 5-7)
4 Install the printer driver. The Peer-to-Peer utility is installed when you
install the printer driver.
❍ For details on installing the printer driver, refer to “Installing the
Printer Driver” on page 3-1.
5 Add a network port to the computer. (“Setting Up the Network
Connections” on page 6-12)
LPR/PORT 9100 Printing
1 Connect the network cable. (“Connecting the Network Cable” on
page 2-2)
2 Specify the IP address, subnet mask, and default gateway settings for
the copier. (
“Assigning an IP Address” on page 6-2)
3 Print the configuration page and check the settings. (“Printing the
Configuration Page” on page 5-7)
4 Install the printer driver.
❍ For details on installing the printer driver, refer to “Installing the
Printer Driver” on page 3-1.
5 Add a network port to the computer. (“Setting Up the Network
Connections” on page 6-12)