Filter
Top Products
Network Printing in a Windows Environment (Available only with FAX3900)
6
6-11
IPP Printing
1 Connect the network cable. (“Connecting the Network Cable” on
page 2-2)
2 Specify the IP address, subnet mask, and default gateway settings for
the copier. (
“Assigning an IP Address” on page 6-2)
3 Print the configuration page and check the settings. (“Printing the
Configuration Page” on page 5-7)
4 Install the printer driver. Add a network port during the installation of
the printer driver.
❍ For details on installing the printer driver, refer to “Installing the
Printer Driver” on page 3-1.
NetWare Server/Client (except NDPS)
1 Connect the network cable. (“Connecting the Network Cable” on
page 2-2)
2 Specify the settings that enable the copier to connect to the NetWare
server. (
“Setting Up the Network Connections” on page 6-12)
3 Set up the NetWare client so that it can print via the NetWare server.
(
“Setting Up the Network Connections” on page 6-12)
NetWare Server/Client (NDPS)
1 Connect the network cable. (“Connecting the Network Cable” on
page 2-2)
2 Specify the IP address, subnet mask, and default gateway settings.
(
“Assigning an IP Address” on page 6-2)
3 Print the configuration page and check the settings. (“Printing the
Configuration Page” on page 5-7)
4 Specify the settings that enable the copier to connect to the NetWare
server. (
“Setting Up the Network Connections” on page 6-12)
5 Set up the NetWare client so that it can print via the NetWare server.
(
“Setting Up the Network Connections” on page 6-12)