Filter
Top Products
6
Network Printing in a Windows Environment (Available only with FAX3900)
6-12
6.4 Setting Up the Network Connections
6.4.1 Peer-to-Peer Printing
Windows 98/ Windows Me
✎
Important
Before continuing to set up the network settings, check the following:
Check that the computer is set up to use the TCP/IP protocol.
Check that the copier is also set up to use the TCP/IP protocol.
Check that the printer driver has been installed on the computer.
(For details on installing the printer driver, refer to “Installing the Printer
Driver” on page 3-1.)
1 Click [Start], point to [Settings], and then click [Printers] to open the
“Printers” folder.
2 Right-click the icon for the installed printer driver.
3 Click [Properties] to open the Properties dialog box.
4 Click the “Details” tab, and then click [Add Port].
5 Select Other.
6 Select Peer2Peer from the list of port types.
7 Click [OK].
8 Enter the copier IP address.
9 Click [OK].