Installing the Printer Driver
2
IC-202 2-3
Automatic Installation Using the Installer
Method to install the printer driver automatically with the installer is de-
scribed.
2
Note
Since this machine is automatically detected with a network connection,
be sure to set the IP address of this machine before connecting it. For de-
tails on specifying the settings, refer to “Setting the IP Address for This
Machine” on page 3-5.
When installing on Windows NT 4.0, 2000, XP, Server 2003, XP x64 or
Server 2003 x64, administrator permissions are required.
If the wizard starts up in order to add new hardware with a USB or parallel
connection, click [Cancel].
For IPP printing, it is not necessary to install the printer driver at this time
since IPP printing setup is performed when the printer driver is installed.
For further details on IPP printing, refer to “IPP Printing (Windows 2000/
XP/Server 2003/XP x64/Server 2003 x64)” on page 3-13.
Printer Driver Refer To
KONICA MINOLTA PCL "Automatic Installation Using the installer
(PCL)" on Page 2-4
KONICA MINOLTA PS "Automatic Installation Using the Installer
(KONICA MINOLTA PS)" on Page 2-8