Filter
Top Products
3
Setting Up Network Printing
3-10 IC-202
3.5 Raw/LPR Printing
This model supports the Raw printing service and LPR printing service. The
Raw printing service is available with Windows 98SE/Me/2000/XP/Server
2003/XP x64/Server 2003 x64 and the LPR printing service with Windows NT
4.0/2000/XP/Server 2003/XP x64/Server 2003 x64. TCP/IP is used as the
network protocol.
2
Note
When conducting the Raw printing with Windows 98SE/Me, an applica-
tion referred to as [Peer to Peer Tool] may be necessary. For more details,
contact your service representative.
Operations on This Machine
% Set the IP address for this machine.
– For the setting procedure, refer to “Setting the IP Address for This
Machine” on page 3-5.
Printer Driver Settings
For Windows 2000/XP/Server 2003/XP x64/Server 2003 x64
1 For Windows 2000, click the [Start], point to [Settings], and then click
[Printers].
For Windows XP/Server 2003/XP x64/Server 2003 x64, click the [Start],
and then click [Printers and Faxes].
2 Right-click the icon of the installed printer, and then click [Properties].
3 On the Ports tab, click the [Add Port].
4 In the “Available Printer Ports” list, select [Standard TCP/IP Port], and
then click the [New Port].
5 When the Add Standard TCP/IP Printer Port Wizard starts up, click the
[Next].
6 In the [Name of printer or IP address] box, enter the IP address for this
machine, and then click the [Next].
7 Select [Custom], and then click the [Settings].