Konica Minolta IC-202 Printer User Manual


 
Setting Up Network Printing
3
IC-202 3-17
3.7 Printing With NetWare
The print controller supports the following environments.
Network Printing in a NetWare Environment
2
Note
Before using bindery emulation, check that bindery emulation is compat-
ible with the NetWare server.
For Remote Printer Mode With NetWare 4.x Bindery Emulation
1 From a client computer, log on with Supervisor permissions to access
the NetWare server where the Pserver is registered.
2 Start up Pconsole.
3 From the [Available Options] list, select [Quick Setup], and then click
the [Enter].
4 Enter the appropriate names in the “Printer Server Name”, “Printer
Name”, “Print Queue Name”, and “Print Queue Volume” fields, select
[Other/Unknown] from the [Printer type] field, and then save the speci-
fied settings.
5 Click the [Esc] to quit Pconsole.
6 Use the NetWare server console to load PSERVER.NLM.
For queue user privileges, printer notification option, assignment of
multiple queues, and passwords, refer to the NetWare documenta-
tion, and specify settings as necessary.
NetWare Version Protocol Used Emulation Service Mode
NetWare 4.x IPX NDS/Bindery Pserver/Nprinter
NetWare 5.x/6 IPX NDS Pserver
TCP/IP NDPS(lpr)