Filter
Top Products
Print Quality Problems
4-5
Dirt on the top edge or back of the paper Check the paper chute and the ramp.
Pull out the paper transfer unit and check for toner on the
paper ramp. Clean the paper ramp using a soft, dry, lint-
free cloth. See Cleaning on page 3-9.
Check the transfer roller.
If the transfer roller is dirty with toner, try printing
several pages.
Characters out of position. Check the file or program.
Check whether the problem is being caused by a
PRESCRIBE command error. If the problem occurs only
with a specific file or program, the most likely cause is an
error in a parameter to a command or command syntax.
Printed Results Corrective Action
Table 4-2 (Continued)