Filter
Top Products
COMMAND CENTER Pages
8 KYOCERA COMMAND CENTER
Basic > Defaults > Time
The current time can be set from the machine’s operation panel and, if a time server is
used to synchronize the time as well, the current time can be adjusted regularly and
easily. Enter the IP address of the time server and click the Synchronize button.
Time information is required when you receive reports from this machine via E-mail. It
is recommended that you set the time when the report mail function is enabled.
Prefix
Length
Specifies the IPv6 prefix length of the hosts or network with
which the print system is connecting.
RA
(Stateless)
Select On to use RA to configure IPv6 addresses.
Default
Gateway
Specifies the IPv6 address of the default gateway.
DHCPv6
(Stateful)
Specifies whether or not to obtain IPv6 IP addresses by
automatic configuration. When RA is turned On, the IP
addresses and server information are obtained via DHCPv6
based on the settings of the automatic configuration made
under RA (router setting).
Item Description
Item Description
Current Local
Time
Displays the time that is currently set in the machine.
Current
Universal Time
(UTC/GMT)
Displays the Greenwich Mean Time that is currently set in
the machine.
Time Zone
Sets a time difference. Click the drop down list and select
your region.
Summer Time
Switches the Summer Time setting On and Off. Select On in
order to have the Summer Time function applied when the
time is synchronized with a time server.
Time Server
Enter the host name or IP address of the time server from
which you want to acquire the time.
Synchronize
with Time
Server now
Click the Synchronize button to synchronize the registered
time with the designated timer server.
Synchronization
Status
Displays the results of the synchronization operation with the
time server.