Filter
Top Products
COMMAND CENTER Pages
16 KYOCERA COMMAND CENTER
Default printer settings will be overridden by the printer driver settings. Settings that
affect the machine entirely, such as locking the operation panel, are found under Basic
Page on page 7.
Printer > Summary of Network Printer Access Methods
The following information that has already been set is displayed here.
- IP Address
-Host Name
- Net BEUI Name
- Apple Talk Name
Printer > System
The table below provides a summary of the items displayed on the System page.
*1 : Available on machines with the duplex printing.
*2 : Available for some color machines.
*3 : Available for monochrome machines and some color machines.
*4 : Available on machines which support Gloss Mode.
Item Description
Form Feed
Timeout
Adjusts the timeout between 5 and 495 seconds, after which
a form feed will occur in the absence of data. The default
setting is 30 seconds.
Emulation
Selects an emulation mode.
Alternate
Emulation
Specifies which emulation mode should be used for
processing at the time data other than KPDL is received,
when AUTO is selected for emulation.
Duplex Mode
*1
Selects the default duplex mode from Off, Long Edge and
Short Edge.
Copies
Sets the number of copies to print.
Page Orientation
Switches Portrait or Landscape page orientation.
Tone
*2
Sets Tone mode to Normal or Fine. The default setting is
Normal.
Gloss Mode
*2*4
Sets Gloss Mode to High or Low. The default setting is
Low.
Color Mode
*2
Sets Color Mode to Monochrome or Color.
KIR Mode
*3
Switches KIR (Kyocera Image Refinement) smoothing On
or Off.
EcoPrint Mode
*3
Switches EcoPrint On or Off to control toner consumption
for saving the printing costs. The default setting is Off.
Resolution
*3
Changes the printing resolution.