Filter
Top Products
COMMAND CENTER Pages
Operation Guide 45
NOTE: If the server type is [Kerberos (Win2000/2003)], only domain names
entered in uppercase will be recognized.
When a user sets authentication and accesses COMMAND CENTER, only the Start
page is displayed. The Login button is displayed in the upper left of the screen. Click it
to log in. When the user logs in with an Administrator account, hidden pages are
displayed and can be accessed. When the user logs in with a General User account,
the user can access the user's account page on Basic > Security > User Login and the
user's document box and shared document box pages.
Advanced > Management > Maintenance
This feature defines the recipient of maintenance information reports.
Domain Name
Specifies the domain name of the Windows domain network
when Network Authentication is specified in the preceding
item.
Host Name
Specifies the domain controller name of the Windows
domain network when Network Authentication is specified
in the preceding item.
Server Type
Specifies the authentication method used by the domain
controller when Network Authentication is specified in the
preceding item. Select NTLM when the domain controller is
Windows NT or Kerberos for Windows 2000 Server or
Windows Server 2003.
Item Description
Item Description
Equipment ID
This is the name by which the machine will be identified.
Recipient
Address
The E-mail address of the recipient. If there is more than one
recipient then the addresses should be separated by a semi-
colon ";".
Subject
You can include model name, serial number, MAC address
and equipment ID in the subject line as follows: Enter one of
the following conversion strings starting with %. The string
will be converted into a pre-defined string to display the
above information.
- %printer = Model
- %serial = Serial Number
- %etheraddr = MAC Address
- %equipid = Equipment ID
E-mail Interval
Sets the time or interval for sending the status information.
Events will be reported at the specified interval.
• None: No report is sent.
• Monthly: Sends on the specified day of specified month.
• Weekly: Sends on the specified day of every week.
• Daily: Sends at the specified time of every day.
• Hourly: Sends at the specified interval every hour.
If a specified day does not exist in the month, such as the
31st, the last day of the month is used as the specified day.