Filter
Top Products
LaCie Biggest Quadra
User Manual
page 52
USB Questions & Answers
What is eSATA?
Your LaCie d2 Quadra Hard Drive uses the latest
in SATA technology, allowing interface (or bus) transfer
rates of up to 1.5Gb/s. SATA technology was originally
developed to serve as an internal interface, delivering
improved performance to internal connections. Soon
after, eSATA, a connector that can be used for SATA I
as well as SATA II, was developed, allowing for the use
of shielded cables outside the PC.
eSATA technology was developed to be rugged and
durable. eSATA connectors do not have the “L” shaped
design of other SATA connectors. In addition, the guide
features are vertically offset and reduced in size to pre-
vent the use of unshielded internal cables in external ap-
plications.
Initial Serial ATA technology removed the perfor-
mance bottleneck of the Parallel ATA specification, and
follows a clearly defined road map to greater and greater
data transfer rates and feature improvements.
Deriving its name from the way that it transmits
signals, in a single stream, or serially, Serial ATA op-
erates in a point-to-point topology. is connectiv-
ity methodology delivers the entire available interface
bandwidth to each device, allowing each device to op-
erate at its maximum throughput, and provides direct
communication between the device and the system at
any time, reducing arbitration delays associated with
shared bus topologies.
What are the key differences between SATA I
and SATA II technology?
For single drive configurations, SATA I, SATA II
and FireWire 800 will have about the same performance.
However, in a RAID0 configuration, SATA I and SATA
II will allow faster transfer rates than FireWire 800,
which may limit transfer rates.
What are the features and benefits of Serial
ATA and Serial ATA II?
e Serial ATA specification provides several key
features that will help spur widespread implementa-
tion:
Performance: Serial ATA is a point-to-point topol-
ogy, and does not have to share the bus, instead dedi-
cating full bandwidth to the device. ese dedicated
links make creating a Serial ATA RAID array quick
and relatively inexpensive to implement.
Easy installation and configuration: ere are no de-
vice IDs, termination or master/slave conflicts, and
the standard supports hot-plug connectivity. Drives
can be added, upgraded or removed without having
to power down the whole system.
Improved reliability: Serial ATA also uses 32-bit cy-
clic redundancy checking (CRC) on all transfers to
ensure correct data transmissions. Due to this CRC
capability, Serial ATA performs protection and re-
covery features at multiple levels: PHY layer, link
layer and transport and software layers.
Command optimization: Serial ATA utilizes Na-
tive Command Queing (NCQ) and first party direct
memory access (DMA) to intelligently order com-
mands in an internal queue within the drive, with-
out having to involve the host CPU. Judging its own
drive head’s angular and rotational position, the drive
selects a data transfer from the queue that will mini-
mize both its seek and rotational latencies.
Simplified structure: Serial ATA utilizes a more ef-
ficient signaling voltage (250mV vs. 5V for Parallel
ATA), and much smaller, thinner and compact cables
and connectors. Due to the simplified cabling (the
reduction in the number of pins and wires), the num-
ber of fault possibilities decreases.
Seamless integration: Serial ATA maintains register
❖
❖
❖
❖
❖
❖
10. eSATA Questions & Answers