Filter
Top Products
Configuring the Network
13
1
Configuring the Network with the Operation Panel
This section describes the basic procedures. Please make the settings appropriate
for the network you are using.
Important
❒ These settings should be made by your systems administrator or after con-
sulting with your systems administrator.
The following table shows the operation panel settings and their default set-
tings. These are included in “TCP/IP Menu” of the ”Network“ menu.
❖
❖❖
❖ Interface Settings/Network
*1
❍ means that this protocol is active.
❖
❖❖
❖ File Transfer Settings
Note
❒ The file transfer function requires the optional Hard Disk Unit.
Setting Name Value
IP Address 011.022.033.044
Subnet Mask 000.000.000.000
Gateway Address 000.000.000.000
Access Control 000.000.000.000
Access Mask 000.000.000.000
Network Boot None
NW Frame Type Auto Select
Effective Protocol TCP/IP
❍
*1
NetWare
❍
*1
NetBEUI
❍
*1
AppleTalk
❍
*1
Ethernet Speed Auto
Setting Name Value
Delivery Server IP Address 000.000.000.000
Fax RX File Transmission Setting per Line • Port 1: Do not Deliver.
• Port 2: Do not Deliver.
• Port 3: Do not Deliver.
Print at Delivery No
Files to Deliver All Files
Delivery Failure File —
Recall Interval Time 300 seconds
Number of Recalls No
RussianC2-EN-sysF1_V4_FM.book Page 13 Thursday, August 23, 2001 11:34 AM