Lanier 5622 AG All in One Printer User Manual


 
Settings You Can Change with the User Tools
71
4
General Features
2
/
2
Output: Printer
You can specify a tray to which documents are delivered.
Internal Tray 1
Internal Tray 2
Finisher Proof Tray
Finisher Shift Tray
Note
The output trays set on the Printer Driver have priority over the output
tray specified above.
For details about output trays, refer to the illustration in p.70 Output:
Copier.
Prepare Stapling
Perform a test staple after replacing staples or removing jammed staples.
Note
Press [OK] to prepare stapling.
<F/F4> Size Settings
Currently three types of F size are available: 8
1
/
2
"×13", 8
1
/
4
"×13", and 8"×13".
The document feeder or exposure glass sensor cannot distinguish these three
types of originals. This function sets the F size for the document feeder or ex-
posure glass sensor. Auto Paper Select or Auto Reduce/Enlarge can be used
for F size originals based on this setting. You'll find it very convenient to use
the machine with the F size setting.
Note
Default: 8
1
/
2
"×13"
Output tray settings
Limitation
You cannot interrupt the current job with a job of a different function that
specifies stapling or sorting.
You can interrupt the current job with an ordinary copy job or facsimile re-
ception. The output tray used when the job is interrupted varies depending
on the type of finisher shift tray and output tray specified for interruption.
RussianC2-EN-sysF1_V4_FM.book Page 71 Thursday, August 23, 2001 11:34 AM