Lanier 5622 AG All in One Printer User Manual


 
Settings You Can Change with the User Tools
85
4
If you selected All Initial Settings
An access code will be required to access all the items in the System Set-
tings, Copier/Document Server Features, Facsimile Features, Printer
Features, and Scanner Features.
If you select All Initial Settings, you will need to enter the access code to
access the Key Operator Code screen.
Program/Change/Delete User Code
Adds, changes or deletes user codes (max 8 digits).
Note
You can register up to 100 user codes. If you add the optional extension
module, you can register up to 500 user codes.
You can also register user codes from SmartNetMonitor for Admin (print-
er option required).
Even if you change the user codes, the counter values are not cleared.
If you clear a user code, the counter values associated with it are also auto-
matically cleared.
[Program/Change]
This registers new user codes and changes the functions that can be
used with user codes and user names.
[Delete]
Deletes a user code.
[Delete All]
Deletes all the user codes.
Display/Print Counter
Allows you to view and print the various counters.
Display/Print Counter
Displays counters for each functions ( Total, Copier, Facsimile, and Print-
er).
Print Counter List
Prints out a list of counters for all functions (Total, Copier, Facsimile, Print-
er, A3/DLT, 2-Sided Copy and Staple).
A If you want to print Counter List, press [Print Counter List], and then press
start.
Note
If you do not want to print, then press [Cancel].
B Press [Exit]
RussianC2-EN-sysF1_V4_FM.book Page 85 Thursday, August 23, 2001 11:34 AM