Lanier 5622 AG All in One Printer User Manual


 
User Tools (System Settings)
82
4
File Transfer
Make these settings as required when using ScanRouter V2 Lite/Professional.
Note
The file transfer function requires the optional Hard Disk Unit.
The optional ScanRouter V2 Professional is required for distributing received
fax documents.
Delivery Server IP Address
Specifies the IP address of the ScanRouter V2 Lite delivery server for distrib-
uting documents or data from the machine.
Note
Default: 000.000.000.000
Press the [
] or [
] key to move between each group of three numbers.
If you make a mistake, press and enter the correct number.
You must also set the delivery server IP address on ScanRouter V2
Lite/Professional. The relevant setting on the machine will be overwritten
by the delivery server IP address set on ScanRouter V2 Lite/Professional.
Fax RX File Transmission
Setting per Line
Specifies whether or not received fax documents should be sent to Scan-
Router V2 Professional for each of the fax lines.
Note
Default: G3 Port 1/Do not Deliver, G3 Port 2/Do not Deliver, G3 Port 3/Do
not Deliver
Print at Delivery
Specifies whether or not received fax documents that are sent to ScanRout-
er V2 Professional should also be printed by the machine at the same time.
Note
Default: No
File to Deliver
Specifies whether all received fax documents or only received fax docu-
ments that include delivery codes (documents with an ID and F code)
should be sent to ScanRouter V2 Professional.
Note
Default: File with Dlvry Code
RussianC2-EN-sysF1_V4_FM.book Page 82 Thursday, August 23, 2001 11:34 AM