Lanier 5622 AG All in One Printer User Manual


 
Settings You Can Change with the User Tools
79
4
Interface Settings/Network
1
/
2
2
/
2
IP Address
Before using this machine with the network environment, you must config-
ure the IP address.
Note
Default: 011.022.033.044
Do not use an IP address that has been used for another machine. To get
the addresses, contact your network administrator.
Press the [
] or [
] key to move between each group of three numbers.
Press [Clear] if you enter the wrong number.
Sub-net Mask
A number used to mathematically "mask" or hide an IP address on the net-
work by eliminating those parts of the address that are alike for all the ma-
chines on the network.
Note
Default: 000.000.000.000
Press the[
] or [
] key to move between each group of three numbers.
Press [Clear] if you enter the wrong number.
Gateway Address
A gateway is a connection or interchange point that connects two networks.
Configure the gateway address for the router or host computer used as a gate-
way.
Note
Default: 000.000.000.000
To get the address, contact your network administrator.
Access Control and Access Mask
You can control the client access. Access control and Access mask should be
set together.
Note
Default: 000.000.000.000
If you do not want to set any limitation for this machine, use the default
settings.
Press [Clear] if you enter the wrong number.
If you set access control as 192.168.15.16, clients addresses might be as-
signed as follows:
RussianC2-EN-sysF1_V4_FM.book Page 79 Thursday, August 23, 2001 11:34 AM