Lanier 5622 AG All in One Printer User Manual


 
User Tools (System Settings)
84
4
Key Operator Tools
1
/
2
If an access code has been set, you cannot use the Key Operator Tools unless you
enter the access code (max. 8 digits). p.84 Key Operator Code
Reference
For details about user codes, p.86 User Code
User Code Management
Allows you to control who uses the machine by setting user codes for users.
To use function with "User Code Management" set to "ON", you must enter a
registered user code. User codes must be registered for user code manage-
ment. For more information about user codes, see p.86 User Code.
Note
Default: Copier/OFF, Document Server/OFF, Facsimile/OFF, Scanner/OFF,
Printer/Auto Program
By using Auto Registration for the printer, you can keep a print log for
each user code entered from the driver.
Key Counter Management
Use the key counter to specify whether users are limited or not.
Note
Default: Copier/OFF, Document Server/OFF, Facsimile/OFF, Scanner/OFF,
Printer/OFF
Key Operator Code
Important
The administrator must properly manage the key operator codes set for
the machine.
This specifies whether or not to use passwords (max. 8 digits) to control use
of the Timer Setting or Key Operator Tools settings for the access codes.
Note
Default: OFF
If you select ON, enter the access code (max. 8 digits) with the number
keys, and then select Partial or All Initial Settings to set the access lim-
it.
If you selected Partial
An access code is only required for the Timer Setting, Key Operator
Tools initial settings and for Key Operator Tools for the fax initial
settings. MENU PROTECT will be set for CHANGE/CONTROL in
the printer initial settings.
RussianC2-EN-sysF1_V4_FM.book Page 84 Thursday, August 23, 2001 11:34 AM