Lanier 5627 AG All in One Printer User Manual


 
Copy Mode
27
2
D
DD
D
Press the {
{{
{Interrupt}
}}
} key again.
The machine resumes the printing
job of the received fax document.
Resuming the interrupted
copying job
A
AA
A Reset the previous original.
B
BB
B Press the {
{{
{Start}
}}
} key.
The machine resumes the inter-
rupted copy run.
Copying and Multi-accessing
If you want to make copy while using
another function, follow the proce-
dure below.
A
AA
A
Press the {
{{
{Interrupt}
}}
} key.
The interrupt display appears on
the panel display.
B
BB
B
Place originals, and then press the
{
{{
{Start}
}}
} key.
The machine interrupts the job that
is printing and starts copying your
originals.
C
CC
C
When copying is complete, re-
move your originals and the cop-
ies.
D
DD
D
Press the {
{{
{Interrupt}
}}
} key again.
The previous job settings will be
restored and the machine will con-
tinue from where it left off.
Note
Machine operations are different
depending on thePrint Priori-
tysettings ( p.68 General
Features
1
/
2
) or the User Code
Management ( p.68 General
Features
1
/
2
) settings.
Reference
p.35 Multi-Access
When “Print Priority” = “Fax”,
“Printer”, or “Display” (default)
The machine completes the op-
eration of the function set by
Print priority before performing
the operation of another func-
tion.
Limitation
While the machine is per-
forming two-sided printing
in fax mode, you cannot
make two-sided copies until
the printing ends.
When “Print Priority” = “Inter-
leave”
The machine performs the oper-
ations in the order in which they
are initiated. If another function
is initiated during operation,
the machine completes the cur-
rent operation before perform-
ing the operation of the function
initiated.
RussianC2-EN-sysF1_V4_FM.book Page 27 Thursday, August 23, 2001 11:34 AM