Filter
Top Products
User Tools (System Settings)
82
4
File Transfer
Make these settings as required when using ScanRouter V2 Lite/Professional.
Note
❒ The file transfer function requires the optional Hard Disk Unit.
❒ The optional ScanRouter V2 Professional is required for distributing received
fax documents.
❖
❖❖
❖ Delivery Server IP Address
Specifies the IP address of the ScanRouter V2 Lite delivery server for distrib-
uting documents or data from the machine.
Note
❒ Default: 000.000.000.000
❒ Press the [←
←←
←] or [→
→→
→] key to move between each group of three numbers.
❒ If you make a mistake, press and enter the correct number.
❒ You must also set the delivery server IP address on ScanRouter V2
Lite/Professional. The relevant setting on the machine will be overwritten
by the delivery server IP address set on ScanRouter V2 Lite/Professional.
❖
❖❖
❖ Fax RX File Transmission
• Setting per Line
Specifies whether or not received fax documents should be sent to Scan-
Router V2 Professional for each of the fax lines.
Note
❒ Default: G3 Port 1/Do not Deliver, G3 Port 2/Do not Deliver, G3 Port 3/Do
not Deliver
• Print at Delivery
Specifies whether or not received fax documents that are sent to ScanRout-
er V2 Professional should also be printed by the machine at the same time.
Note
❒ Default: No
• File to Deliver
Specifies whether all received fax documents or only received fax docu-
ments that include delivery codes (documents with an ID and F code)
should be sent to ScanRouter V2 Professional.
Note
❒ Default: File with Dlvry Code
RussianC2-EN-sysF1_V4_FM.book Page 82 Thursday, August 23, 2001 11:34 AM