Filter
Top Products
Multi-Access
35
2
Multi-Access
You can carry out another job using a different function while the current job is
being performed.
This allows you to handle your jobs efficiently regardless of how the machine is
being used. For example:
• While making copies, you can scan documents to store in the Document Serv-
er.
• While printing documents saved in the Document Server, the machine can re-
ceive print data.
• You can make copies while receiving fax data.
• While printing print data, you can make operations for copying.
Performing multiple functions simultaneously like this is called Multi-accessing.
Note
❒ The chart below shows sample operations with "Print priority" set to "Inter-
rupt" (⇒ p.68).
❒ $: Operation is enabled when the relevant function key is pressed and re-
mote switching (of the scanner) is done.
❒❍: Operation is enabled when the [Interrupt] key is pressed to interrupt the
preceding operation.
❒ →: Operation is performed automatically after the preceding operation ends.
❒ ×: The operation must be started after the preceding operation ends. (Simul-
taneous operations are not available.)
❒ When the optional Internal Tray, Internal Shift Tray, Finisher 500, or Finisher
1000 is installed on the machine, you can specify an output tray to which doc-
uments are to be delivered. For more information about how to specify an
output tray for each function, see the following descriptions:
• p.70 “Output: Copier”
• p.70 “Output: Document Server”
• p.70 “Output: Facsimile”
• p.71 “Output: Printer”
RussianC2-EN-sysF1_V4_FM.book Page 35 Thursday, August 23, 2001 11:34 AM