Filter
Top Products
T
ROUBLESHOOTING
8.8
Clearing LCD Error Messages
Messages appear on the display of the control panel to indicate
the machine’s status or errors. Refer to the following table to
understand the messages and correct the problem, if necessary.
Messages and their meanings are listed in alphabetical order.
Display Meaning Suggested solutions
Cancel ?
1:Yes 2:No
Your machine’s memory is
full and cannot store the
document into memory.
To cancel the fax job, press the
1
button to accept “Yes.”
If you want to send the pages that
were stored, press the
2
button to
accept “No.” You should send the
remaining pages later when
memory is available.
[Comm. Error]
The machine has a
communication problem.
Ask the sender to try again.
CRU Fuse Error
The machine has a
problem with recognizing
the new toner cartridge.
Please contact a service
representative or re-install the
catridge.
[Document Jam]
The loaded document has
jammed in the ADF
(Automatic Document
Feeder).
Clear the document jam. See
page 8.2.
[Door Open]
The front or rear cover is
not securely latched.
Close the cover until it locks into
place.
Group Not
Available
You have tried to select a
group location number
where only a single
location number can be
used, such as when
adding locations for a
broadcasting operation.
Just use a one-touch or speed dial
number or dial a number manually
using the number keypad.