Lanier LF215 All in One Printer User Manual


 
F
AXING
4.22
Advanced Fax Functions
Sending Broadcasting Faxes
Using the
Broadcasting
button on the control panel, you can use
the broadcasting fax feature, which allows you to send a document
to multiple locations. Documents are automatically stored in the
memory and sent to a remote station. After transmission, the
documents are automatically erased from the memory.
1
Load the document(s) face down into the ADF.
For details about loading a document, see page 4.5.
2
Adjust the document resolution to suit your fax needs. See
page 4.6.
If you need to change the darkness, see page 4.3.
3
Press Broadcasting on the control panel.
4
Enter the number of the remote machine using the number
keypad.
You can use one-touch keypad or speed dial or group dial
numbers. For details about storing a number, see page 4.15.
5
Press Enter to confirm the number. The display asks you to
enter another fax number to send the document.
NOTE
: The Another No. prompt does not appear if you have
added numbers for another broadcasting or delay fax job. You
must wait until the job is completed.
6
To enter more fax numbers, press 1 to select “Yes” and
repeat steps 4 and 5. You can add up to 10 destinations.
Note that you cannot use group dial numbers for another
fax number.
7
When you finish entering fax numbers, press 2 to select
“No” at a Another No. prompt.
The document is scanned into the memory before
transmission. The display shows the memory capacity and
the number of pages being stored in the memory.
The machine begins sending the document in order of the
numbers you entered.