Filter
Top Products
F
AXING
4.14
To set up the DRPD mode:
1
Press Menu until “Fax Setup” appears on the top line of the
display.
The first available menu item, “Receive Mode,” displays on
the bottom line.
2
Press the scroll button ( or ) until you see “DRPD Mode”
on the bottom line and press Enter.
3
When “Set” displays on the bottom line, press Enter.
The LCD displays ‘[Waiting Ring].”
4
Call your fax number from another telephone. It is not
necessary to place the call from a fax machine.
5
When your machine begins to ring, do not answer the call.
The machine requires several rings to learn the pattern.
When the machine completes learning, the LCD displays
“End DRPD [Setup]”.
If the DRPD setup fails, “DRPD Ring Error” appears. Press
Enter when “DRPD Mode” displays and retry from Step 3.
6
To return to Standby Mode, press Clear/Stop.
When the DRPD feature is set up, the DRPD option is available
in the Receive Mode menu. To receive faxes in the DRPD mode,
you need to set the menu to DRPD.
NOTES
:
• DRPD must be set up again if you re-assign your fax number, or
connect the machine to another telephone line.
• After DRPD has been set up, call your fax number again to verify
that the machine answers with a fax tone. Then have a call
placed to a different number assigned to that same line to be
sure the call is forwarded to the extension telephone or
answering machine plugged into the EXT. jack.
Receiving Faxes in the Memory
Since your machine is a multi-tasking device, it can receive
faxes while you are making copies or printing. If you receive a
fax while you are copying or printing, your machine stores
incoming faxes in the memory. Then, as soon as you finish
copying or printing, the machine automatically prints the fax.