Filter
Top Products
3: Command Line Interface
PremierWave XN Command Reference 12
An overview of the levels in the PremierWave XN is presented in Figure 3-2 CLI Level Hierarchy
below.
Figure 3-2 CLI Level Hierarchy
Commands at the login level (see Figure 3-3 Login Level Commands below) do not affect current
configuration settings and are not displayed initially. If you type ?, you will see the login sub-
commands. These commands provide diagnostic and status information only.
Figure 3-3 Login Level Commands
>?
clrscrn exit
ping <host> ping <host> <count>
ping <host> <count> <timeout> show
show history trace route <host>
trace route <host> <protocol> enable
>
Note: To configure the PremierWave XN, you must be in the enable level and any of its
sub-levels. Figure 3-4 below shows the enable level commands.
(login) enable
ssl
ethernet link
if 1
query port
syslog
line <line>
filesystem
configure
device
ssh
telnet
rss
dns
wlan link
edit <name>
email <number>
ssh
bridge <bridge>
arp
diagnostics
ftp
host <number>
http
ip
smtp
wlan profiles
vip
terminal <line>
terminal network
tunnel <line>
xml
client
server
credentials
trusted authorities
accept
connect
disconnect
modem
packing
serial
icmp
if 2
cli
log