Filter
Top Products
5: Commands and Levels
PremierWave XN Command Reference 56
start character <control>
Sets the connect mode start character.
The character may be input as text, control, decimal, or
hex.
A control character has the form <control>C.
A decimal value character has the form \99.
A hex value character has the form 0xFF.
write
Stores the current configuration in permanent memory.
connect (tunnel-connect:1) level commands
block network disable
Forwards (tunnels) network data in connect mode tunne-
ling.
block network enable
Discards all data coming in from the connect mode tunnel
before forwarding
it to the serial interface (generally used for debugging).
block serial disable
Forwards (tunnels) serial data in connect mode tunneling.
block serial enable
Discards all data coming in from the serial interface before
forwarding
it to the connect mode tunnel (generally used for debug-
ging).
clrscrn
Clears the screen.
connect mode always
Enables the tunneling server to always establish tunneling
connections.
connect mode any character
Enables the tunneling server to establish a tunneling con-
nection when a
character is received on the corresponding line (serial
port).
connect mode disable
Disables connect mode tunneling.
connect mode modem control asserted Enables the tunneling server to make tunneling connec-
tions when the modem
control pin is asserted.
connect mode modem emulation
Enables modem emulation for connect mode tunneling.
connect mode start character
Enables connect mode tunneling when the configured
start character
is received on the line.
default connect mode
Restores the default connect mode as "disable".
default host mode
Connects to the first host in the list that accepts the con-
nection.
default local port Uses a random port number as the local port for establish-
ing tunneling
connections to other devices.
default reconnect time Restores the default reconnect time value for connect
mode tunneling.
default start character
Defaults the connect mode start character.
email connect
<number>
Sets an email profile to use to send an email alert upon
establishing
a connect mode tunnel.
<number> = the number of the email profile to use.
email disconnect <number>
Sets an email profile to use to send an email alert upon
closing
a connect mode tunnel.
<number> = the number of the email profile to use.
exit
Returns to the tunnel level.
flush serial disable
Characters already in the serial data buffer are retained
upon establishing
a connect mode tunneling connection.
flush serial enable
Flushes the serial data buffer upon establishing a connect