Filter
Top Products
5: Commands and Levels
PremierWave XN Command Reference 57
mode tunneling
connection.
flush start character disable
Enables forwarding of the connect start character into the
network.
flush start character enable
Disables forwarding of the connect start character into the
network.
host
<instance>
Enters the next lower level.
Specify the instance for the next lower level.
host mode sequential
Connects to the first host in the list that accepts the con-
nection.
host mode simultaneous Selects simultaneous connections to all hosts on the host
list.
kill connection
Disconnects the active connect mode tunneling connec-
tion or connections.
local port <number>
Sets a specific port for use as the local port.
<number> = the number of the port to use.
no email connect Discontinues sending email alerts upon establishing a
connect mode tunnel.
no email disconnect
Discontinues sending email alerts upon closing a connect
mode tunnel.
promote host <number>
Promotes the identified host, exchanging it place with the
host above it,
to adjust the order of the defined hosts.
reconnect time <milliseconds>
Sets the reconnect time value for tunneling connections
established by the
device in milliseconds.
<milliseconds> = timeout in milliseconds.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
show status
Displays tunnel connect status.
start character <control>
Sets the connect mode start character.
The character may be input as text, control, decimal, or
hex.
A control character has the form <control>C.
A decimal value character has the form \99.
A hex value character has the form 0xFF.
write
Stores the current configuration in permanent memory.
credentials (ssl-credentials) level commands
clrscrn
Clears the screen.
create <credential name>
Create a new credential name
delete <credential name>
Delete existing credential by name
edit <credential name>
View or edit an existing profile
exit
Exits to the ssl level.
show
Show existing credential names
show history
Displays the last 20 commands entered during the current
CLI session.
write
Stores the current configuration in permanent memory.
device (device) level commands
auto show tlog
Continuously displays the internal trouble log.
clrscrn
Clears the screen.
exit
Exit to the enable level.
show
Show system information