Filter
Top Products
5: Commands and Levels
PremierWave XN Command Reference 137
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
show statistics
show connection statistics
ssh username <text>
Sets the SSH user name for use when establishing tunne-
ling connections
with other devices.
<text> = SSH user name.
tcp keep alive <milliseconds>
Enables TCP keep alive for connect mode tunneling and
sets the timer.
<milliseconds> = timer value, in milliseconds.
validate certificate disable
Skips verification of the server certificate when connect-
ing.
validate certificate enable Requires verification of the server certificate when con-
necting.
vip disable
Makes connections using the specified Address.
vip enable
Makes connections using the VIP name.
vip name <text>
Sets the VIP name.
write
Stores the current configuration in permanent memory.
host 8 (tunnel-connect-host:1:8) level commands
address
<text>
Sets the remote host to establish tunneling connections
with.
<text> = IP address or host name of the remote host.
aes decrypt key <hexadecimal>
Sets the connect tunnel AES decrypt key with up to 16
bytes.
Each byte is represented by two adjacent hex digits.
Bytes may run together or be separated by optional punc-
tuation:
123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
Note that quotes must enclose the value if it contains
spaces.
aes decrypt key text <text>
Sets the connect tunnel AES decrypt key with up to 16
bytes.
Each byte is represented by a single character.
Note that quotes must enclose the value if it contains
spaces.
aes encrypt key <hexadecimal>
Sets the connect tunnel AES encrypt key with up to 16
bytes.
Each byte is represented by two adjacent hex digits.
Bytes may run together or be separated by optional punc-
tuation:
123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
Note that quotes must enclose the value if it contains
spaces.
aes encrypt key text
<text>
Sets the connect tunnel AES encrypt key with up to 16
bytes.
Each byte is represented by a single character.
Note that quotes must enclose the value if it contains
spaces.
auto show statistics
show connection statistics
clrscrn
Clears the screen.
credentials <text>
Selects the RSA/DSA certificates by name for the SSL
client.
default protocol
Restores the default protocol as "TCP".
default tcp keep alive Restores the default 45 second connect mode TCP keep
alive timeout.