Filter
Top Products
5: Commands and Levels
PremierWave XN Command Reference 163
figured.
terminal network
Enters the configure-terminal level for the network.
tunnel <line>
Enters the tunnel level.
<line> = number of the tunnel line (serial port) to be confi-
gured.
write
Stores the current configuration in permanent memory.
vip (config-vip) level commands
auto show counters
Displays VIP counters continuously.
auto show status
Displays VIP status continuously.
clear counters
Sets the VIP counters to zero.
clrscrn
Clears the screen.
exit
Exits to the configuration level.
no clear counters
Restores the VIP counters to the aggregate values.
show
Displays the current configuration.
show counters
Displays the VIP counters.
show history
Displays the last 20 commands entered during the current
CLI session.
show status
Displays the VIP status.
state disable
Disables use of Virtual IP (VIP) addresses.
state enable
Enables use of Virtual IP (VIP) addresses.
write
Stores the current configuration in permanent memory.
wlan profiles (config-profiles) level commands
apply wlan Try out WLAN settings without saving them to Flash.
If the settings do not work, when you reboot the device,
it will still have the original settings.
clrscrn
Clears the screen.
create <profile name>
Create a new profile name
delete <profile name>
Delete existing profile by name
edit <profile name>
View or edit an existing profile
exit
Exits to the config level.
show
Show existing profile names
show history
Displays the last 20 commands entered during the current
CLI session.
write
Stores the current configuration in permanent memory.
xml (xml) level commands
clrscrn
Clears the screen.
exit
Exits to the enable level.
secret xcr dump
Dump XML configuration containing secrets to the console
secret xcr dump <group list>
Dump specified XML configuration containing secrets to
the console
secret xcr export <file>
Save XML configuration containing secrets to a file
secret xcr export <file> <group list>
Save specified XML configuration containing secrets to a
local file
show history
Displays the last 20 commands entered during the current
CLI session.
write
Stores the current configuration in permanent memory.
xcr dump
Dump XML configuration to the console
xcr dump <group list>
Dump specified XML configuration to the console
xcr export
<file>
Save XML configuration to a file
xcr export <file> <group list>
Save specified XML configuration to a local file