Filter
Top Products
5: Commands and Levels
PremierWave XN Command Reference 50
clrscrn
Clears the screen.
credentials <text>
Selects the RSA/DSA certificates by name for the SSL
server.
default accept mode
Restores the default accept mode as "always".
default local port
Uses the default port number as the local port for accept
mode tunneling.
The default port is 10000 + #, where # is the line number
for this tunnel.
default protocol
Restores the default protocol as "TCP".
default start character
Defaults the accept mode start character.
default tcp keep alive Restores the default 45 second accept mode TCP keep
alive timeout.
email connect <number>
Sets an email profile to use to send an email alert upon
establishing
an accept mode tunnel.
<number> = the number of the email profile to use.
email disconnect <number>
Sets an email profile to use to send an email alert upon
closing
an accept mode tunnel.
<number> = the number of the email profile to use.
exit
Returns to the tunnel level.
flush serial disable
Characters already in the serial data buffer are retained
upon establishing
an accept mode tunneling connection.
flush serial enable
Flushes the serial data buffer upon establishing an accept
mode tunneling
connection.
flush start character disable
Enables forwarding of the accept start character into the
network.
flush start character enable Disables forwarding of the accept start character into the
network.
kill connection
Disconnects the active accept mode tunneling connection.
local port <number>
Sets the port to use for accept mode tunneling.
<number> = number of the port to use.
no aes decrypt key
Removes the accept tunnel AES decrypt key.
no aes encrypt key
Removes the accept tunnel AES encrypt key.
no credentials
Clears the RSA/DSA certificate selection.
no email connect Discontinues sending email alerts upon establishing an
accept mode tunnel.
no email disconnect
Discontinues sending email alerts upon closing an accept
mode tunnel.
no tcp keep alive
Disables the accept mode TCP keep alive timeout.
password
Enters the next lower level.
protocol ssh
Uses SSH protocol for accept mode tunneling.
protocol ssl
Uses SSL protocol for accept mode tunneling.
protocol tcp
Uses TCP protocol for accept mode tunneling.
protocol tcp aes
Uses TCP protocol with AES encryption for accept mode
tunneling.
protocol telnet Uses Telnet protocol (with IAC) for accept mode tunne-
ling.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.