Filter
Top Products
5: Commands and Levels
PremierWave XN Command Reference 52
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
write
Stores the current configuration in permanent memory.
choice 2 (config-wlan-choice:wlan0:2) level commands
apply wlan
Try out WLAN settings without saving them to Flash.
If the settings do not work, when you reboot the device,
it will still have the original settings.
clrscrn
Clears the screen.
exit
Exits to the next higher level.
no profile
Removes reference to the profile.
profile <text>
Selects a profile.
<text> = name of the profile.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
write
Stores the current configuration in permanent memory.
choice 3 (config-wlan-choice:wlan0:3) level commands
apply wlan Try out WLAN settings without saving them to Flash.
If the settings do not work, when you reboot the device,
it will still have the original settings.
clrscrn
Clears the screen.
exit
Exits to the next higher level.
no profile
Removes reference to the profile.
profile <text>
Selects a profile.
<text> = name of the profile.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
write
Stores the current configuration in permanent memory.
choice 4 (config-wlan-choice:wlan0:4) level commands
apply wlan
Try out WLAN settings without saving them to Flash.
If the settings do not work, when you reboot the device,
it will still have the original settings.
clrscrn
Clears the screen.
exit
Exits to the next higher level.
no profile
Removes reference to the profile.
profile <text>
Selects a profile.
<text> = name of the profile.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
write
Stores the current configuration in permanent memory.
cli (config-cli) level commands
clrscrn
Clears the screen.
default inactivity timeout
The default inactivity timeout will apply to CLI sessions.
default login password
Restores the default CLI login password.
default quit connect line Restores the default string used to quit the "connect line
<line>" command.
enable level password <text>
Sets the enable-level password.
exit
Exits to the configuration level.