Filter
Top Products
LaserSpeed 8000-3 Instruction Handbook
RS-232/RS-422 Communication
Part No. 93463 / Drawing No. 0921-01561 Page 158 of 221 Revision A (Sep 2007)
TT Configurable Text Output Mode
TT<CR> Data Output Command
Response Format: Variable
TT<N><CR> Set
<N> specifies the output format. The value can be set with a command such as TT15<CR>
(sets the format to 15). To start receiving data, send the command TT<CR>. This output
mode allows you to turn on and off parts of the serial output message, which can make the
data simpler to process and reduce the number of bytes being transmitted.
Value Format
6 <TT,V,Q><CR>
15 <TT,L,V,Q,S><CR>
13 <TT,L,Q,S><CR>
14 <TT,V,Q,S><CR>
77 <TT,L,Q,S,T><CR>
78 <TT,V,Q,S,T><CR>
79 <TT,L,V,Q,S,T><CR>
Where:
Notation Description Length (Bytes)
TT Current Value of TT Setting Varies
L Length * 1000 10
V Velocity * 1000 10
Q Quality Factor 2
S Status 2
T Temperature * 100 4
Example:
To set TT to 79, and then start receiving data:
1) Send TT79<CR>
2) Send TT<CR>
The LS8000-3 will start transmitting data in this format:
79,+000000370,000012348,15,63,3125<CR>
79,+000000494,000012347,15,63,3125<CR>
79,+000000617,000012345,15,63,3125<CR>