Filter
Top Products
LaserSpeed 8000-3 Instruction Handbook
LaserTrak Software
Part No. 93463 / Drawing No. 0921-01561 Page 97 of 221 Revision A (Sep 2007)
Note: Make sure that the LaserSpeed gauge is connected to the computer
via RS232, RS422 or Ethernet before starting the LaserTrak
software. The first thing the LaserTrak software does is establish
communication between the LaserSpeed gauge and the computer. If
no gauge is connected, communication will not be established and
you will see the following screen.
If you get the Gauge Not Found message, you can still run LaserTrak by
recalling and displaying stored data.
LaserTrak will display
the following screen
when starting up if
communication has
been established
between the gauge
and the software.