Filter
Top Products
LaserSpeed 8000-3 Instruction Handbook
Interfacing with the LS8000-3
Part No. 93463 / Drawing No. 0921-01561 Page 77 of 221 Revision A (Sep 2007)
Banner D10 Through Beam Switch
Single through beam
Signal D10 LaserSpeed
Power (+12 v to +24v) Brown N/A
Material Present White 10
Signal Ground Blue 11
Notes:
Use with a LaserSpeed 4000-2, 8000-2, 8000-3 or 9000-3
See the Connecting Material Present Switches
section for wiring
Program the LaserSpeed for material present “external – active high”
Program the D10 module for Super High Speed output
You may have to teach the D10 light and dark levels (refer to D10
manual)
Dual through beam (uses two D10 modules)
Signal D10 LaserSpeed
Power (+12 v to +24v) Brown N/A
Material Present Black 10
Signal Ground Blue 11
Notes:
Use with a LaserSpeed 4000-2, 8000-2, 8000-3 or 9000-3
See the Connecting Material Present Switches
section for wiring
Program the D10 module for Super High Speed output
Program the LaserSpeed for material present “external – active low”
You may have to teach the D10 light and dark levels (refer to D10
manual)
The distance between the switch pairs needs to be added to the length
reported by the LaserSpeed