Filter
Top Products
that support the RAID card to get advanced SATA/SAS hardware RAID functions. See “RAID card” on page
33 and “Installing or removing the RAID card” on page 98 for more information.
Note: For server models with more than four hard disk drives or models that use SAS hard disk drives, there
must be a RAID card installed.
The RAID card provides the WebBIOS Conguration Utility program to help you congure RAID
independently of the operating system. You can also install the MegaRAID Storage Manager program and
the MegaCLI Conguration Utility program to help you manage the RAID array and RAID controller in an
operating system environment. The supported RAID levels are RAID 0, 1, and 10. To activate RAID 5 and
50 levels, you need to install a RAID 5 key on the RAID card. See “Installing or removing the ThinkServer
9240-8i RAID 5 Upgrade Key” on page 100
.
The installation packages for the MegaRAID Storage Manager program and the MegaCLI Conguration
Utility program are on the ThinkServer EasyStartup DVD. After you enter the operating system, insert the
ThinkServer EasyStartup DVD into the optical drive. The installation packages for the programs are located in
the Utilities and Others folder in the root directory of the DVD.
Note: The ThinkServer EasyStartup DVD is designed for different types of servers and the Utilities and Others
folder might contain additional installation packages that are not required to be installed into your server.
For instructions on how to congure and manage the advanced SATA or SAS hardware RAID, refer to
the MegaRAID SAS Software User Guide on the documentation DVD that comes with your server. This
document is also available on the Lenovo Web site at:
http://www.lenovo.com/ThinkServerUserGuides
Conguring the Ethernet controllers
The Ethernet controllers are integrated on the system board. They provide an interface for connecting to
a 10 Mbps, 100 Mbps, or 1000 Mbps network and provide full-duplex (FDX) capability, which enables
simultaneous transmission and reception of data on the network.
You do not have to set any jumpers or congure the Ethernet controllers. However, you must install a device
driver to enable the operating system to address the controllers.
The ThinkServer EasyStartup program simplies the process of conguring RAID and installing supported
operating systems and device drivers on your server. See “Using the ThinkServer EasyStartup program”
on page 69
.
The device drivers for onboard Ethernet controllers are also available for download at
http://support.lenovo.com. To download the drivers, click Download Drivers & Software and then follow
the instructions on the Web page.
Updating the rmware
The rmware in the server is periodically updated and is available for download on the Lenovo Support
Web site.
Go to http://support.lenovo.com, click Download Drivers & Software, and then follow the instructions on the
Web page to check for the latest level of rmware, such as the BIOS and BMC updates and device drivers.
When you replace a device in the server, you might have to either update the server with the latest version
of the rmware that is stored in memory on the device or reash the BIOS, the BMC rmware, and the
FRU/SDR from a disc image.
80 ThinkServer Hardware Maintenance Manual