Filter
Top Products
Ordering a maintenance kit
To identify the supported fuser type, view the label on the fuser. Do either of the following:
• Remove the toner cartridge and the imaging unit. The two-digit fuser type code (such as 00 or 01) can be seen on
the front of the fuser.
Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes.
Extended exposure to light may cause print quality problems.
• Pull down the printer rear door. The two-digit fuser type code (such as 00 or 01) can be seen on the rear of the
fuser.
Notes:
• Using certain types of paper may require more frequent replacement of the maintenance kit.
• The separator roller, fuser, pick roller assembly, and transfer roller are all included in the maintenance kit and
can be individually ordered and replaced if necessary.
• For more information on replacing the parts included in the maintenance kit, see the instruction sheet that
came with each part.
Lexmark Return Program fuser maintenance kit type
Type Part number
MX710 Series Return Program fuser maintenance kit Type 00 40X8420
MX710 Series Return Program fuser maintenance kit Type 01 40X8421
MX710 Series Return Program fuser maintenance kit Type 02 40X8422
MX710 Series Return Program fuser maintenance kit Type 03 40X8423
MX710 Series Return Program fuser maintenance kit Type 04 40X8424
Lexmark regular fuser maintenance kit type
Type Part number
MX710 Series regular fuser maintenance kit Type 05 40X8425
MX710 Series regular fuser maintenance kit Type 06 40X8426
MX710 Series regular fuser maintenance kit Type 07 40X8427
MX710 Series regular fuser maintenance kit Type 08 40X8428
MX710 Series regular fuser maintenance kit Type 09 40X8429
Lexmark roller kit
Part number
MX710 Series roller kit 40X7706
Lexmark ADF maintenance kit
Part number
MX710 Series ADF maintenance kit 40X8431
Maintaining the printer 244