Filter
Top Products
Select a lower print
quality
1 From the software application, click File Print.
2 Click Properties, Preferences, Options, or Setup.
3 Click Quality/Copies.
4 From the Quality/Speed area, select a lower print quality.
Software may not be
installed correctly
For more information, see “Software may not be installed correctly” on page 43.
Partial document or photo prints
Check document
placement
Make sure the document or photo is loaded facedown on the scanner glass in the lower
right corner.
Check paper size Make sure the paper size being used matches the size you selected.
Photo smudges
Photo smudges To prevent smudging, avoid touching the surface of a printed photo. For best results,
remove each printed sheet individually from the paper exit tray, and allow the prints to dry
at least 24 hours before stacking, displaying, or storing.
Copy troubleshooting
• “Copier does not respond” on page 47
• “Scanner unit does not close” on page 47
• “Poor copy quality” on page 48
• “Partial document or photo copies” on page 48
Copier does not respond
Check the control panel
for any blinking lights
If one of the lights is blinking, see “Blinking lights on the control panel” on page 53.
Check power
If the light is not on, see “Power button is not lit” on page 42.
Software may not be
installed correctly
For more information, see “Software may not be installed correctly” on page 44.
Scanner unit does not close
Check for obstructions
1 Lift the scanner unit.
2 Remove any obstruction keeping the scanner unit open.
3 Lower the scanner unit.
Troubleshooting
47