Lexmark 2500 Series Printer User Manual


 
Poor copy quality
Blank pages
Checkerboard pattern
Distorted graphics or pictures
Missing characters
Faded print
Dark print
Skewed lines
Smudges
Streaks
Unexpected characters
White lines in print
Check the control
panel for any blinking
lights
If one of the lights is blinking, see “Blinking lights on the control panel” on page 53.
Check ink Check the ink levels, and install a new print cartridge if necessary.
Clean the scanner glass If the scanner glass is dirty, gently wipe it with a clean, lint-free cloth dampened with water.
Review steps to
improve print quality
See “Improving print quality” on page 37.
Check quality of
original document
If the quality of the original document is not satisfactory, try using a clearer version of the
document or image.
Are you scanning from
photo or glossy paper,
a magazine, or a
newspaper?
If you are copying or scanning from photo or glossy paper, a magazine, or a newspaper,
see “Removing image patterns from photos, magazines, or newspapers” in the “Scanning”
chapter of the User's Guide on the CD.
Check document
placement
Make sure the document or photo is loaded facedown on the scanner glass in the lower
right corner.
Partial document or photo copies
Check document
placement
Make sure the document or photo is loaded facedown on the scanner glass in the lower
right corner.
Check paper size Make sure the paper size being used matches the size you selected.
Scan troubleshooting
“Scanner does not respond” on page 49
“Scan was not successful” on page 49
“Scanning takes too long or freezes the computer” on page 49
“Poor scanned image quality” on page 50
“Partial document or photo scans” on page 50
Troubleshooting
48