Filter
Top Products
24
Using printer menus
Network/Ports
TCP/IP
This menu section is used to view and change the Transmission Control Protocol/Internet Protocol settings.
Note: This menu is not displayed for non-network models.
Standard Network
Use this menu selection to change printer settings affecting jobs sent to the printer through a network port (Standard Network).
Menu selection Purpose Values
TCP/IP Sets the network option to
TCP/IP (Transmission Control Protocol/
Internet Protocol)
Activate On*
Off
View Hostname View only
Address 4 field IP address
Netmask
Gateway
Enable DHCP On*
Off
Enable RARP
Enable BOOTP
AutoIP
Enable FTP/TFTP
HTTP Server Enabled
WINS Server Address 4 field IP address
DNS Server Address
Menu selection Purpose Values
PCL SmartSwitch Configures the printer so it automatically
switches to PCL emulation when a print
job received through the network port
requires it, regardless of the default
printer language
On* Printer examines data on the network
interface and selects PCL emulation if the
data indicates that is the required printer
language.
Off Printer does not examine the incoming
data. The printer uses PostScript emulation
to process the job if PS SmartSwitch is On,
or uses the default printer language
specified in the Setup Menu if PS
SmartSwitch is Off.