Lexmark 70E Printer User Manual


 
Scanning
ADF Scanner glass
Use the ADF for multiplepage documents.
Note: The ADF is available only in select printer models. If you
purchased a printer without an ADF, then load original
documents or photos on the scanner glass.
Use the scanner glass for single pages, small items (such
as postcards or photos), transparencies, photo paper, or
thin media (such as magazine clippings).
Tips for scanning
Use the scanner glass when scanning twosided pages if your printer does not support duplex scanning or the ADF
does not support the original document size.
When using the ADF, adjust the paper guide on the ADF to the width of the original document.
When using the scanner glass, close the scanner cover, if possible, to avoid dark edges on the scanned image.
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
When the document to be scanned is in place with the settings you want, press to start scanning.
Scanning to a local computer
1 Load the original document faceup into the ADF or facedown on the scanner glass.
2 From the printer control panel, navigate to:
> Scan > > Computer > USBConnected Computer >
The USBconnected computer will receive the scan by default.
Note: Make sure the scan software is installed on the destination computer.
Scanning 63