Filter
Top Products
3 Turn the printer off.
4 Align the printer with the tray, and then lower the printer into place.
Note: Optional trays lock together when stacked. When necessary, remove stacked trays one at a time from the
top down.
1
2
3
1 Standard 550-sheet tray (Tray 1)
2 Optional 550-sheet trays
5 Turn the printer back on.
6 Set the printer software to recognize the optional input source.
For more information, see “Updating available options in the printer driver” on page 45.
Supported finishing features
The printer supports the following finishing features:
• 500‑Sheet Offset Stacker
• 500-Sheet Staple Finisher
• 500-Sheet Staple, Hole Punch Finisher
• 5‑bin mailbox
Additional printer setup 40