Filter
Top Products
Overview of the Lexmark E120 operator panel
18
Using the operator panels
Complex page
ENA connection lost
Light sequence:
Error—On
Secondary light sequence:
Press twice quickly to see the secondary light
sequence.
Ready / Data—Blinks three times
Message:
The page may not print correctly because the print information
on the page is too complex (that is, too large for printer memory).
Solution:
Turn printer off and back on to try printing the page again. If not successful:
• Press to clear message and continue processing the job (some print data may be lost).
To avoid this error in the future:
• Reduce complexity of the page by reducing the amount of text or graphics.
• Set Page Protect to On in the Local Printer Setup Utility (see Software and Documentation CD).
Light sequence:
Error—On
Secondary light sequence:
Press twice quickly to see the secondary light
sequence.
Ready / Data—Blinks five times
Message:
During power-on cycle, the printer detected the connection to
the external network adapter was lost.
Note: This error is only detected during the power-on cycle.
Solution:
• Press to clear message.
• Re-establish connection with the external network adapter.
Primary light
sequence
Secondary light
sequence
Primary light
sequence
Secondary light
sequence