Filter
Top Products
Using the printer menus
73
Understanding the operator panel
PostScript Menu
Use the PostScript Menu to change printer settings that only affect jobs using the PostScript emulation printer language.
Note: Values marked by an asterisk (*) are the factory default settings.
PPDS Menu
Use the PPDS Menu to change printer settings that only affect jobs using the PPDS emulation printer language.
Note: Values marked by an asterisk (*) are the factory default settings.
Menu item Purpose Values
Font Priority
To establish the font search order.
Note: Font Priority is only displayed
when a formatted flash or hard disk is
installed, is neither defective nor Read/
Write or Write protected, and Job
Buffer Size is not set to 100%.
Resident* Printer searches printer memory for
the requested font before searching
flash memory or hard disk.
Flash/Disk Printer searches the hard disk and
flash memory for the requested font
before searching printer memory.
PDF Menu
Use the PDF Menu within the
PostScript Menu to change printer
settings that only affect jobs using
Portable Document Format (PDF) files.
See PPDS Menu for more information.
Print PS Error
To print a page defining the PostScript
emulation error when an error occurs.
Off* Discards the print job without printing
an error message.
On Prints an error message before it
discards the job.
Menu item Purpose Values
Auto CR after
LF
To specify whether the printer
automatically performs a carriage
return after a line feed control
command.
Off* Printer does not perform a carriage
return after a line feed control
command.
On Printer performs a carriage return after
a line feed control command.
Auto LF after
CR
To specify whether the printer
automatically performs a line feed after
a carriage return control command.
Off* Printer does not perform a line feed
after a carriage return control
command.
On Printer performs a line feed after a
carriage return control command.
Best Fit
To determine whether to perform a font
best fit search if the requested font
cannot be found.
Off Printer stops printing when a
requested font cannot be found. An
error message is posted indicating the
font could not be found.
On* Printer continues even though it was
not able to locate a requested font.
Instead, the printer tries to select
another font that best matches the
characteristics of the requested font.