Filter
Top Products
Understanding the printer messages
84
Understanding the printer messages
35 Res Save Off Deficient
Memory
The printer lacks the memory needed to
enable Resource Save. This message
usually indicates too much memory is
allocated for one or more of the printer link
buffers.
•Press Go to disable Resource Save and
continue printing.
• To enable Resource Save after you get
this message:
– Make sure the link buffers are set to
Auto, and exit the menus to activate
the link buffer changes.
– When Ready is displayed, enable
Resource Save from the Setup Menu.
• Install additional memory.
37 Insufficient Collation
Area
The printer memory (or hard disk, if
installed) does not have the free space
necessary to collate the print job.
•Press Go to print the portion of the job
already stored and begin collating the
rest of the job.
•Press Menu to open the Job Menu, and
cancel the current job.
See also: How to cancel a print job
37 Insufficient Defrag
Memory
The printer cannot defragment flash
memory because the printer memory used
to store undeleted flash resources is full.
• Delete fonts, macros, and other data in
printer memory.
• Install additional printer memory.
38 Memory Full The printer is processing data, but the
memory used to store pages is full.
•Press Go to clear the message and
continue printing the job. The job may
not print correctly.
•Press Menu to open the Job Menu and
cancel the current job.
• To avoid this error in the future:
– Simplify the print job by reducing the
amount of text or graphics on a page
and deleting unnecessary
downloaded fonts or macros.
– Install additional printer memory.
See also: How to clear paper jams
39 Complex Page The page may not print correctly because
the print information on the page is too
complex.
•Press Go to clear the message and
continue printing the job. The job may
not print correctly.
•Press Menu to open the Job Menu and
cancel the current job.
• To avoid this error in the future:
– Reduce the complexity of the page by
reducing the amount of text or
graphics on the page and deleting
unnecessary downloaded fonts or
macros.
– Set Page Protect to On in the Setup
Menu.
– Install additional printer memory.
See also: Setup menu
42 Cartridge Region
Mismatch
The cartridge you are using is not designed
to match the region of your printer.
• Install a toner cartridge made for your
printer region.
50 PPDS Font Error The PPDS interpreter has encountered a
font error, or the printer has received invalid
PPDS download font data.
•Press Go to clear the message and
continue printing.
•Press Menu to open the Job Menu, and
cancel the job or reset the printer.
51 Defective Flash The printer detects defective flash memory. Press Go to clear the message and
continue printing. You must install different
flash memory before you can download any
resources to flash.
Message What this message means What you can do