Filter
Top Products
107
6.5 Verifying the Coax Interface with the SIMM
for IPDS
To verify the SCS adapter configuration, print a SCS IDB dump page. Follow these
steps:
1. Press Menu> until NETWORK MENU displays. Press Select.
2. Press Menu> until NETWORK OPTION 1 displays. Press Select. (This
example assumes the SCS Adapter is installed in option connector 1.)
3. Press Menu> until SCS MENU 1 displays. Press Select.
4. Press Menu> until you see TEST OPTIONS. Press Select.
5. Press Menu> until you see SCS IDB DUMP. Press Select.
6. Press Menu> until you see Print. Press Select.
The printer returns to Ready when the IDB Dump has been printed.
The SCS IDB dump contains all the current adapter settings including the IPDS
Enabled setting and the current SCS adapter firmware level. Look for the sentence near
the top of the page telling you whether IPDS is active or not active.
Additional Information
Please refer to the Intermate A/T Optra S, Optra SC, Optra K 1220, Optra Color 45
and Optra Color 1200 Coax/Twinax Adapter for SCS Installation and User's Guide for
a detailed description on how to set up the SCS adapter.