Filter
Top Products
50
Example 2
If an IPDS number is mapped (used) twice, the lowest tray mapping number is
activated (if available). For example if Tray Mapping 6 and 7 both map to IPDS 64 as
shown below, the printer will select media from the Env Feeder.
Tray Mapping 6 IPDS 64 Env Feeder
Tray Mapping 7 IPDS 64 Manual Env
In other words, the printer attempts to map to (select media from) the Env Feeder first
and if it is not installed, the printer defaults to Manual Env.
Example 3
To link multiple input trays as one big input tray, you need to make changes under the
printer's PAPER MENU. You need to set the PAPER SIZE and PAPER TYPE for
each of the trays you want to link to the same value.
For example, the host expects colored paper in Tray 1 and you want to link Tray 2 and
Tray 3, which have plain paper. Do the following:
Leave the MAP INPUT TRAYS at their defaults:
TRAY MAP 1 = IPDS 000 mapped to Tray 1
TRAY MAP 2 = IPDS 001 mapped to Tray 2
Insert letter-size colored paper in Tray 1. Insert letter-size plain paper in Trays 2 and 3.
The paper size is detected by the printer:
Tray 1 Size = Letter
Tray 2 Size = Letter
Tray 3 Size = Letter